Join this discussion
Contractors reply here; homeowners use HomeManager.
1 reply
- V
It sounds like you’re dealing with a door hinge that has a torx screw, which is a bit different from the typical hinge pin setup. The torx screw is likely holding the hinge together, preventing you from removing the pin. Here’s what you can do:
1. **Identify the Torx Size**: First, determine the size of the torx screw. You can find a torx screwdriver or bit set at a local hardware store, usually ranging from $10 to $30.
2. **Remove the Torx Screw**: Use the appropriate torx driver to remove the screw at the bottom of the hinge. Once removed, this should allow you to pull the hinge apart and access the pin.
3. **Remove the Hinge Pin**: If the pin is still stuck after removing the screw, you might need to tap it gently with a hammer and a punch or a similar tool to help dislodge it.
If you’re still having trouble or feel uncomfortable doing this, consider hiring a local handyman or carpenter. Costs for this type of work can range from $50 to $150 depending on your location.
As a next step, I recommend getting 2–3 local quotes on Handyman.com to find a professional who can assist you.
— Assisted answer